888-828-8646

Equipment & Capability Spec Sheet

Technical Capabilities & Equipment Standards

The documented equipment standards behind every Concrete Cutting Miami, LLC quote — written for general contractors, engineers and property managers who need real numbers for a submittal, permit package or insurance file.

Request a Free Quote Call 888-828-8646

Text job photos to 786-442-1975 for a same-day estimate.

How We Work

These specifications represent the verified operational standards for Concrete Cutting Miami, LLC. The listed limits are the ones our estimators quote against — if a cut is outside them, we say so before mobilizing instead of discovering it on site.

Every method is matched to the structure and the site: hydraulic equipment for occupied buildings and tight interiors, wet cutting wherever silica dust is a concern, and vibration-controlled breakers for selective demolition near finished work. More than 20+ years of South Florida experience sits behind each standard, from Brickell high-rises to Keys seawalls.

Equipment Standards

MethodologyEquipment standardMax depth / powerPrimary application
Hydraulic Hand Sawing Wolverine hydraulic hand saw 8" – 12" Precision openings, HVAC penetrations, over-cut control
Precision Chain Sawing ICS chainsaw on an ICS Merit portable power pack Up to 36" (3 ft) Square corners with no over-cuts, deep precision work
Core Drilling Weka core drills (electric / hydraulic) Any depth — extension rods Circular penetrations for plumbing, electrical and HVAC lines
Selective Demolition Hilti TE Series electric breakers (AVR) Heavy removal Vibration-controlled, dust-controlled removal next to finished work

On The Job

ICS hydraulic chainsaw cutting a square opening in a concrete wall
ICS chainsaw — square corners, no over-cuts
Weka core drill cutting a circular penetration through concrete
Weka core drill — clean circular penetrations
Hydraulic hand saw cutting a precision opening in a concrete slab
Wolverine hand saw — precision openings and trenches

Safety & Compliance

  • Silica control: wet cutting and dust extraction keep respirable crystalline silica inside the OSHA 29 CFR 1926.1153 exposure limit of 50 µg/m³ over an 8-hour shift — see OSHA’s silica compliance guide (PDF).
  • Vibration-controlled demolition: Hilti TE breakers with Active Vibration Reduction for work beside occupied units and finished surfaces.
  • Fully insured: certificates of insurance emailed to your office on request, before mobilization.
  • Scheduling: same-day dispatch for urgent Miami-Dade jobs, 24-hour scheduling for the Florida Keys, and a 30 percent mobilization deposit that locks your date.

Frequently Asked Questions

What equipment do you use for concrete cutting in Miami?
Wolverine hydraulic hand saws for openings and trenches, ICS chainsaws on ICS Merit power packs for deep cuts with square corners, Weka core drills for circular penetrations, and Hilti TE electric breakers for selective demolition. All of it is hydraulic or electric — no gas engines inside occupied buildings.
How deep can you cut concrete?
Hand sawing reaches 8 to 12 inches, the ICS chainsaw cuts up to 36 inches (3 feet) in a single pass, and core drilling goes deeper than any saw — depth is set by the bit and extension rods, so there is no practical ceiling for a normal wall or slab penetration.
Do you cut concrete without creating dust?
Yes. Every cut is run wet, which suppresses silica dust at the blade instead of letting it go airborne. That keeps the job inside the OSHA 29 CFR 1926.1153 limit of 50 µg/m³ over an 8-hour shift and keeps the rest of the building clean.
Can you cut inside a home or business while it is occupied?
Yes — this is exactly why we run hydraulic and electric equipment. There are no exhaust fumes, the saws are quiet enough for occupied buildings, and wet cutting plus plastic containment keeps dust out of the rest of the space. We also schedule nights and weekends when a business cannot shut down.
Do you provide documentation for permits or insurance?
Yes. We can supply this spec sheet, a certificate of insurance, and job-specific details for a submittal or permit package. Ask when you request your quote and we will email the documents to your office.
What areas do you cover, and how fast can you get there?
All of Miami-Dade, Broward and the Florida Keys — the full 160 miles from Miami to Key West. Urgent Miami-Dade jobs get same-day dispatch; Keys work is typically scheduled within 24 hours. Call or text 888-828-8646.

Need these specs on your next job?

Send the drawings or a photo of the cut — you get a straight answer and a hard number.

Request a Free Consultation