888-828-8646

Expertise in Cutler Bay

Cutler Bay is south county living at its best — waterfront homes along the canals, tree-canopied streets off Old Cutler Road, and busy plazas around Southland Mall. From pool decks in Saga Bay to commercial cuts along US-1, our crews handle the cutting, drilling and scanning this coastal corner of Miami-Dade demands.

Saga Bay & Lakes by the Bay Waterfront-Side Cutting

Waterfront, canal-side lots mean careful work — slab cuts, dock-area concrete and sea-wall-adjacent removals, all cut wet with slurry contained so nothing reaches the canal.

Old Cutler Road Canopy Streets & Estate Lots

The estate lots and mature trees along Old Cutler Road call for a lighter touch: compact equipment, protected landscaping and cuts planned around what stays standing.

Southland Mall Area & US-1 Commercial Cuts

The shopping and service plazas around Southland Mall keep our saws busy with storefront buildouts, door and window openings, and utility trenching cut around store hours.

Pools & Patios Backyard Transformations

Cutler Bay backyards are full of pools and patios that have reached the end of the line — we take them out cleanly, deck, shell and all, and leave the yard ready for what comes next.

01

South-County Care

Cutler Bay jobs are often older concrete in green, established neighborhoods — we work with the lot, not against it, and leave the property better than we found it.

02

Scan Before You Cut

Post-tension slabs are common across south Dade, and unseen cables do not forgive. We run GPR scans to map rebar, cables and conduit before the saw touches concrete.

03

Canal-Safe Practice

Between the canals and the bay, debris control is not optional — we cut wet, contain the slurry and leave the water cleaner than most jobsites do.

Your Trusted Partner in Cutler Bay

From Saga Bay to Southland Mall and every canal-side street in between, we are your local partner for concrete cutting, core drilling and GPR scanning. One crew, the right equipment, and a straight answer before work starts — call or text 888-828-8646 or request a quote online.

Servicing Cutler Bay and All of Miami-Dade County

Cutler Bay is one of the communities we cover from our Miami base — and our concrete cutting and demolition services reach every corner of the county:

  • 01 Miami
  • 02 Miami Beach
  • 03 Homestead
  • 04 Hialeah
  • 05 Doral
  • 06 Kendall
  • 07 Coral Gables
  • 08 North Miami
  • 09 Miami Gardens
  • 10 North Miami Beach
  • 11 Aventura
  • 12 Sunny Isles Beach
  • 13 Miami Lakes
  • 14 Hialeah Gardens
  • 15 Opa-locka
  • 16 Miami Springs
  • 17 Key Biscayne
  • 18 Pinecrest
  • 19 Palmetto Bay
  • 20 South Miami
  • 21 Westchester
  • 22 The Hammocks
  • 23 Kendale Lakes
  • 24 Dadeland
  • 25 Brickell
  • 26 Little Havana
  • 27 Wynwood
  • 28 Coconut Grove
  • 29 Florida City

Frequently Asked Questions

What concrete cutting services do you offer in Cutler Bay, FL?
Everything a Cutler Bay job calls for: slab sawing, wall sawing, hydraulic hand and chain sawing, core drilling, GPR scanning and selective demolition — plus cleanup. One crew handles the full scope, from the first scan to the finished cut.
Do you handle pool removals in Cutler Bay?
Yes — full pool removals and partial fills are common Cutler Bay work for us: deck cutting, shell demolition, and clean haul-off, coordinated with your contractor or inspector as needed.
Can you scan concrete before cutting?
Yes — and on South Florida's post-tension slabs, we often insist on it. Ground-penetrating radar maps rebar, post-tension cables, conduit and slab thickness before any saw touches concrete, so every cut is planned around what is actually inside the slab.
How much does concrete cutting cost in Cutler Bay?
Rates depend on thickness, reinforcement and access — cutting typically runs about $10-$30 per linear foot, with a $500+ service charge for truck mobilization and setup. Every quote is written before work starts. See the pricing guide or call or text 888-828-8646.
Can you cut concrete on canal-side properties without damaging the waterway?
That's exactly how we work on waterfront lots — wet cutting with vacuum containment, nothing washing into the canal, and cleanup handled before we leave.
How do I get a quote for a Cutler Bay project?
Call or text 888-828-8646, or send the details online. Tell us the address, what has to be cut or drilled, and any drawings or photos you have — we will look at the site and give you a written quote before any work is scheduled.
How soon can you get to a Cutler Bay job?
We schedule county-wide from one dispatch. Most projects are quoted within a day, and urgent work gets a same-call conversation about timing — call or text 888-828-8646 and tell us what is happening.