Concrete Curb Cutting Miami
You’ve invested in widening your driveway to fit an extra car, boat, or RV. But there’s one problem: the city curb is still blocking your new path. Instead of jumping the "hump" and ruining your tires or your vehicle's suspension, Concrete Cutting Miami provides the solution: Concrete Curb Cutting. We specialize in horizontally cutting existing curbs to create a smooth, tapered transition that matches your new driveway width. From single-family homes in Miami to commercial lots in Ft. Lauderdale, we modify the concrete to street level without the expense of full demolition and repouring.
Core Tech
Horizontal SawsFlush-cut street level precision.
Corner Detail
Tapered WingsHand cut-off saws shape smooth edges.
Structural
No RepourModifies the existing structure in place.
Water Flow
Drainage SafePreserves the existing city gutter pan.
ApplicationsWho Needs Curb Cutting?
Modifying the street curb is necessary whenever access paths are altered. We service Driveway Extensions for homeowners adding pavers to the side of their driveway, create flat approaches for RV & Boat Parking, cut down curbs for ADA Accessibility in commercial lots, and build smooth crossings for Golf Cart Paths in gated communities.
The SolutionSeamless Driveway Widening
Seamless Transition
We cut the curb down to the flow-line of the gutter, creating a smooth entry for low-clearance vehicles and heavy trailers.
No Repouring Needed
Unlike full demolition, which requires framing and pouring new cement, our process modifies the existing structure. It’s faster, cleaner, and cheaper.
Aesthetic Finish
We use hand saw tools and grinders to taper the edges (the "wings") to slope gently back up to the full curb height, giving your entrance a professional look.
The ProcessYou Mark, We Cut
To ensure we cut exactly where you need it for your new driveway extension, we follow a strict, straightforward layout protocol.
01. Layout
You measure the width of your new driveway opening and mark the cut lines on the curb with paint. We cut strictly to your marks.
02. Permitting
You handle the "Right of Way" permit with the local municipality (if required for your neighborhood).
03. Precision Cutting
We arrive, set up water control for dust suppression, and horizontally slice the curb to the requested level.
04. Debris Removal
We break down and haul away the heavy concrete blocks removed from the curb line.
05. Ready to Use
The cut is finished, the area is clean, and you can drive over your new entrance immediately.
Frequently Asked Questions
Does cutting the curb ruin the street drainage?
No. We only cut the vertical part of the curb. The flat "gutter pan" at the bottom remains untouched. This ensures that rainwater continues to flow along the street to the storm drain, just as it did before. If you have existing standing water issues, we might recommend drainage system trenching solutions instead.
Can you cut the curb flush with the asphalt?
We typically leave a very small lip (about 1 inch) or match the existing gutter line. Cutting it completely flush or below the road grade can allow street water to flood up into your driveway during heavy Miami rains.
Do I need a permit?
Yes. Curbs are usually property of the municipality. You will likely need a Public Works or Right-of-Way permit. We perform the work based on the permit and layout you provide.
Can you pour the new driveway apron too?
We specialize in the cutting. If you need to remove the grass and pour a new concrete apron to connect the street to your driveway, we can perform the slab sawing and removal of the old section, but you will need a mason for the new concrete pour.
How much does it cost?
Pricing is typically based on linear footage. A standard single-car driveway widening is very affordable compared to full replacement. Text us a photo and the width measurement for an instant estimate.
Curb Cutting Gallery
